All City of St. Petersburg meters measure water in hundreds of gallons. To read a meter, disregard the red hand, the zero printed on the face (far right), and the first movable register on the right side of the meter. Read all other registers as they appear.
How do I read my water meter in Pinellas County?
To determine if the meter has been misread, simply copy down the numbers (from left to right) on the meter’s gallons register. (The gallons register looks similar to a car odometer.) 2. Compare the numbers on the gallons register to the numbers indicated as the “Current Reading” on your utility bill.
How do I read my water meter reading?
For best results, read your meter at the same time each day. Meters measure water use in cubic meter. To determine the amount of water used since your last reading, take the current meter read and subtract the previous meter read (from your water bill), which will give you the number of cubic meter/s used.
What do the numbers on a water metre mean?
A dial face display. On the face of the meter you will see a series of numbers. The numbers measure the amount of water used in kilolitres and litres. On most water meters the black numbers measure kilolitres (thousands of litres) and the red numbers measure litres.
What is the average water bill in Pinellas County?
Customers with a 2-inch meter will pay a base rate of $18.70 in 2020, then $30.60 in FY 2021, with a hike to $42.50 the next year, followed by an increase to $54.40. For 3-inch meters, the base rate will go up to $32.30 next year, to $57.89 in FY 2021, then $83.30 and $108.80.
How do you read an outside water meter?
On the meter face there are two sets of numbers, black on the left and red on the right. The black numbers show the number of cubic metres used, while the red ones and the dials show litres. When submitting a meter reading, only read the black numbers and ignore the red numbers (one cubic metre = 1,000 litres).
How do you read a water meter in gallons?
To read a water meter in gallons, take note of the number at the bottom of your water meter. The number to the far right is a “standing 0”, represented by the number of gallons used as indicated by the hand. The meter above is an analog meter that reads: 302152 gallons.
What is the small dial on a water meter?
The small red triangle shaped piece on the dial is a low flow indicator that will rotate if there is any flow through the meter. It is useful when checking for leaks.
How does a digital water meter work?
How do digital water meters work? The digital water meter reads the volume of water that enters your property in real-time and wirelessly sends this information back to South East Water. We can then identify irregular water use patterns – which may be caused by a water leak at the property.
How do you calculate water usage?
Meters record how much water has been used. Deducting the current meter reading from the previous reading will tell you how many units of water you have used since your last meter reading. To determine your dollar amount of water consumption, multiply the units used by your current water rate.
What is the reading of the meter?
To read the meter: Read the first 4 dials from left to right – ignore the large dials or red dials. If the pointer is between two numbers, write down the lower number – if it’s between 9 and 0, write down 9. If the pointer is directly over a number, write down that number.
How can I track the water usage in my home?
To calculate flow for faucets (indoor and outdoor) and showerheads, turn faucet to the normal flow rate that you use, and hold a container under the tap for 10 seconds and measure the quantity of water in the container. Multiply the measured quantity of water by 6 to calculate the gallons per minutes (gpm).
How often do they read the water meter?
If you have a water meter, it should be read at least once a year, and read by your water company at least once every two years. Some water companies might read your meter more frequently. Often the water meter is installed so that your company can read the meter remotely.
How much is the average water bill in St Petersburg Florida?
Water rates in St. Petersburg vary by usage. On average, though, a household using 4,000 gallons of water and wastewater can expect to pay the following rates: Potable water: $33.03.
How much does 1000 gallons of water cost in Florida?
All residential consumption charges are $7.71 per 1,000 gallons of metered water. The Lehigh Acres System rates (as of October 2020) for base water services range from $15.50 for a ⅝” x 3/4” meter to $1,781.16 for a 10” meter.
How much is water bill in St Petersburg FL?
WATER RATES
| Meter Size | Current Base Charge | Proposed FY23 Base Charge |
|---|---|---|
| 1″ | $33.77 | $34.45 |
| 1.5″ | $67.55 | $68.90 |
| 2″ | $108.08 | $110.24 |
| 3″ | $216.15 | $220.48 |
Can I read my own water meter?
You’ll need to check you have the right meter by matching the serial number to the one on your bill. Occasionally, outside meters might be in shared pits, not individual ones. The covers for these can be heavy, so we don’t recommend you attempt to read them yourself.
Why is my water meter box full of water?
The standing water will normally drain out or seep into the soil after a rainstorm. Another cause for standing water inside a meter box is over irrigation. This is most common during the summer months when customers are more actively running sprinkler systems.
Should a water meter spinning very slowly?
Check the meter. If the flow indicator is turning (it may be very slowly), or the flow rate on the digital meter is anything but 0.00, you have a leak.
How many dials are there in water meter?
Notice that your residential water meter has only one dial. The dial has a sweep hand which measures water usage in gallons. One complete revolution equals ten gallons of water used. The odometer-type register in the middle of the dial registers the hundreds of gallons used.
Does a water meter run continuously?
When your water meter is running without a regular reason such as you using your faucet, it could be caused by something like: Leaking pipes: Whether it is a pinhole leak or a slab leak, having a leaking pipe or two will cause your water meter to run as it creates a continuous flow of water in your home.