In southeastern Kansas, the depth to the top of the aquifer ranges from 200 feet (60 m) in southeast Cherokee County to more than 1,000 feet (300 m) in northwest Crawford County. Well yields typically range from 150 gpm to more than 1,000 gpm.
How deep is the average well in Kansas?
Depth to water varies from less than 25 to 50 feet in the Equus Beds, to over 350 feet in Haskell County, based on meas- urements from 2010 to 2012. Southwest Kansas has the greatest saturated thickness with over 300 feet still occur- ring in Seward and Stevens counties.
Can you dig a well in Kansas?
People who drill water wells for their personal use (and not for larger-scale uses such as irrigation) do not need to apply for a water right, and thus generally do not need to interact with the DWR. The Kansas Department of Health and Environment has general responsibility for water-quality issues in the state.
How deep is the water table in Wichita Kansas?
The deposits underlying the valley range in thickness from a featheredge along the margin to about 55 feet, but average about 45 feet.
How deep are most old wells?
Dug wells have a large diameter, are shallow (approximately 10 to 30 feet deep) and are not cased continuously. Driven wells are constructed by driving pipe into the ground. Driven wells are cased continuously and shallow (approximately 30 to 50 feet deep).
How much does it cost to drill a water well in Kansas?
Well Drilling Costs By State
| State | Average Cost Per Foot |
|---|---|
| Kansas | $28 – $61 |
| Kentucky | $27 – $59 |
| Louisiana | $28 – $61 |
| Maine | $27 – $58 |
How much does it cost to drill an oil well in Kansas?
Those in exploration aren’t doing so well because it costs $400,000 to $600,000 to drill a vertical well. But those who own a lot of producing wells are still making a profit. He estimates that the average cost to bring a barrel of oil out of an existing well in Kansas as $20 to $30 per barrel.
How do you know if there is water in your land?
Public water is commonly provided by a governmental entity or water company. To find out whether public water is available, look at the details of the sales listing for the land or talk to the seller or a real estate agent (if one is involved).
How do I know if I can drill a well on my property?
If you own a remote property that needs a well, here are some tips on how to find the best location to dig a well.
- Consider Other Nearby Properties.
- Keep the Well Away from Septic Drainage Fields.
- Keep the Well Away from Animal Pens.
- Look for an Absence of Large Rocks.
Can I drill my own water well?
Drilling a shallow well is a pretty simple task, going down about 25 feet or so when you hit first water (at least in my location). This type of well could be drilled in a weekend by hand using a general purpose, extendable post-hole auger. This type of well can be cased off with a manual pump and used for irrigation.
What is ground water level?
Groundwater level is a term that is used in a relatively loose way, normally referring to the level, either below ground or above ordnance datum, at which soil or rock is saturated. This is also referred to as the water table and represents the top of the saturated zone. Above the water table lies the unsaturated zone.
Do wells run out of water?
A well can run dry because of reduced precipitation, low water levels, high water consumption, water leaks, sandy soil, and well infill. These causes can be due to well mismanagement or natural factors.
Do deeper wells mean better water?
Water quality in a deep well usually changes more slowly than in a shallow well. That’s because groundwater does some mixing as it moves through the aquifer. A spill a mile away from your deep well in the Basin and Range aquifer might be substantially diluted with clean aquifer water before it gets to your well.
Does rain replenish well water?
While your well is a 6” hole in the ground, it is not directly replenished by rainfall, as you might expect a cistern to function. The rainfall that seeps into the ground on your property moves through the soil at a rate of only 10 feet per year.
How many years does a water well last?
The average lifespan for a well is 30–50 years. 2. How deep is the well? Drilled wells typically go down 100 feet or more.
How long does it take to drill a 500 foot well?
*Prices are for a complete water well system. to drill. A well takes about a week to install and lasts up to 40 years with proper maintenance and care.
Can you deepen an existing well?
The truth is that drilling experts can easily deepen wells that are already in place. The process is much cheaper than paying for a completely new well and lets you continue to draw water from your current source.
Are they drilling for oil in Kansas?
Kansas is a top 10 oil-producing state and accounts for almost 1% of total U.S. crude oil output. Kansas is also an oil-refining state. A network of pipelines delivers crude oil to the state’s three refineries, which combined can process about 390,000 barrels of crude oil per day.
How much does an abandoned oil rig cost?
According to a consultant’s report about the platforms in federal waters off the California coast, decommissioning costs there range from $19 million to $189 million per platform.
Is there fracking in Kansas?
According to the Kansas Geological Survey, approximately 244,000 oil and gas wells were drilled in Kansas from 1947 to 2011. Of that total, approximately 57,000 wells—23.4 percent of all wells—were hydraulically fractured. The map to the left shows known oil and gas fields in Kansas as of May 2017.
Which trees indicate underground water?
Trees like the ash, the alder, the willow and the poplar are also useful in this regard. These trees generally grow in freshwater aquifers where the water table depth is not more than ten meters. These species are found in riparian ecosystems and areas characterized by shallow groundwater, such as bottomlands.