KC Water proudly serves more than 170,000 Kansas City residential and commercial customers, and 34 wholesale customers in the greater Kansas City area. In 2019, KC Water produced an average of 90 million gallons of drinking water per day, enough water to fill approximately 136 Olympic-sized swimming pools each day.
How much water does Kansas use per day?
Based on a 2009 estimated population of 2.8 million people in Kansas (U.S. Census Bureau website), the average water consumption works out to about 1,380 gallons per person per day.
How much water does a town use per day?
Their residential water use ranges from 40 to 470 gallons per capita per day. The California average is 106 gallons, taking into account the number of people served by each supplier. The California average is right in the middle between Beverly Hills (135) and Los Angeles (78).
How much water does a typical house use per day?
The average American family uses more than 300 gallons of water per day at home. Roughly 70 percent of this use occurs indoors. In addition, there are other miscellaneous uses of water in the house which may be very significant, depending on the degree of water conservation by the household.
What states use the most water per day?
Idaho had one of the largest per capita uses of the public water supply in the United States, totaling 184 gallons per day, followed by Utah with 169 gallons and Wyoming at 156 gallons.
Which state uses the most water 2020?
California is the largest consumer of water in the US.
How much water does a shower use?
Showers account for about 20 percent of the water used indoors and are typically the third-largest use of water in the average home. According to a national study by the Water Research Foundation in 2016, the average shower uses roughly 17 gallons of water and lasts for around eight minutes.
What wastes the most water?
Daily Water Usage at Home
- 24% – Toilet. 18-24 gallons.
- 20% – Shower. 20-50 gallons.
- 19% – Faucets. 26 gallons.
- 17% – Washing Machine. 30 gallons.
- 6% – Miscellaneous. The remaining 6 percent are from a variety of sources, such as bathtubs which take up to 36 gallons to fill, or dishwashing which can use up to 30 gallons per load.
How much water does a 2 person household use per day?
On average in the US, water use at home (water from the tap, toilet, dishwasher, etc.) adds up to about 138 gallons per household per day, or 60 gallons per person per day.
How many gallons of water does a house use in a month?
What is Average? The water industry estimates that an average person uses 3,000 gallons of water monthly, so a family of 4 would use 12,000 gallons for bathing, cooking, washing, recreation and watering.
What uses the most water in a house?
Toilet flushing
Toilet flushing is by far the largest single use of water in a home. Most toilets use from 4 to 6 gallons of water for each flush. On average, a dishwasher uses about 50 percent less water than the amount used when washing and rinsing dishes by hand. This entry was posted in .
How much water does a family of 4 use per day?
The average family uses more than 300 gallons of water per day.
What is average water usage?
Household water use varies enormously depending on the number of people in a house and their personal needs. On average; A person uses 152 litres per day.
Which U.S. city uses the most water?
Corpus Christi
Cities with the most water
| Rank | City | Percentage of Water |
|---|---|---|
| 1 | Corpus Christi | 67.19% |
| 2 | Anchorage | 13.07% |
| 3 | Virginia Beach | 49.93% |
| 4 | San Francisco | 79.79% |
Which state uses the least water?
Explanation: Data from 2010 shows that the states with the lowest overall usage are Rhode Island, Maine, Vermont, and South Dakota. Washington DC and the US Virgin Islands also have very low water usage.
Who uses the most water in the US?
Thermoelectric power and irrigation remained the two largest uses of water in 2015, and total withdrawals decreased for thermoelectric power but increased for irrigation.
What states have too much water?
Only three states have 30% or more water area: Rhode Island, Michigan, and Hawaii.
Which state has the most fresh drinking water?
Hawaii ranks first in the nation for air and water quality, as well as in the overall natural environment category.
Which state has the most water supply?
California uses the most water of any state, according to the U.S. Geological Survey, up to 9 percent of all withdrawals from the national supply.
How many gallons does a toilet flush use?
1.6 gallons
Flush Facts
Recent advancements have allowed toilets to use 1.28 gallons per flush or less while still providing equal or superior performance. This is 20 percent less water than the current federal standard of 1.6 gallons per flush.
How much water does it take to flush a toilet?
1.6 gallons
Although toilets all look pretty much alike, the amount of water released by flushing varies widely from one toilet to another. Generally speaking, the older the toilet, the more water it uses. Toilets built before 1982 use 5 to 7 gallons per flush. Now, toilets are designed to flush using only 1.6 gallons of water.