The John Day River, located in Clatsop County, Oregon, is one of two rivers in Oregon named for John Day, a member of William Price Hunt’s Astoria overland expedition of 1811 to 1812. The other John Day River is located over 200 miles upstream, east of The Dalles, Oregon.
How many rivers does John Day have in Oregon?
two Oregon rivers
The river is the larger of two Oregon rivers named after John Day, a hunter with the Pacific Fur Company; the other is a six-mile-long tributary of the Columbia near Astoria.
Where does the John Day River start and end?
Absent of dams for 281 miles, the John Day is one of the longest free-flowing rivers in the continental United States and the longest undammed tributary of the Columbia. Elevations range from 265 feet at the confluence with the Columbia River to over 9,000 feet at the headwaters in the Strawberry Mountain Range.
What river is the John Day Dam on?
the Columbia River
John Day Lock & Dam is located 216 miles upriver from the mouth of the Columbia River near the city of Rufus, Ore. Dedicated in 1968, construction of John Day Lock & Dam was completed in 1971.
Where is the John Day River?
Oregon
The John Day River is the longest undammed river in Oregon. Located in eastern Oregon, the section from Service Creek to Tumwater Falls flows through a number of colorful canyons broad valleys, and breathtaking terrain.
Can you float the John Day River?
There are four sections of river along the lower John Day that can be floated individually or together (some as day trips, some as over-nighters). WRC’s efforts have delivered or improved public access to boat launches at Thirtymile, Cottonwood Bridge, Starvation Lane and McDonald’s Ferry.
Can you canoe the John Day River?
Outfitters/ Resources: There are several shuttle operators, including Donna’s John Day River Shuttles (541-763-4884) and Service Creek Stage Stop (541-468-3331). Boats can be rented from Alder Creek Kayak and Canoe in Portland (503-285-0464) or Bend (541-317-9407).
How do boats get through the John Day Dam?
The reservoir impounded by the dam is Lake Umatilla, and it runs 76.4 miles (123.0 km) up the river channel to the foot of the McNary Dam.
| John Day Dam | |
|---|---|
| Construction began | 1958 |
| Opening date | 1971 |
| Construction cost | US$511 million |
| Dam and spillways |
Where can I fish on the John Day River?
Bank anglers will find by far the best access to the main river from where Highway 207 joins Highway 19 and on upstream. Smallmouth bass also are in the smaller North Fork, and there is plentiful access there for bank anglers there from the mouth up to Monument.
Where can I catch catfish on the John Day River?
Where to Catch Catfish. An area called the narrows and just below the falls are among spots to fish, but there are plenty of channel cats throughout the John Day Arm. The arm also can be good for other warmwater fish, including smallmouth bass and crappie, and in the late fall trolling for steelhead is popular.
How many dams are in Oregon?
869 dams
Oregon has a total of 869 dams in the NID database.
How deep is the Columbia River?
The Columbia River has the biggest discharge into the Pacific Ocean of any river. Water depths have been estimated at 400 feet (120 m) over modern Portland, Oregon, and at 1,000 feet (300 m) at Wallula Gap.
Why was the John Day Dam built?
John Day Lock and Dam was authorized by Congress for power, navigation, and flood control in the 1950 Flood Control Act and amended in 1957. The project was completed in 1971 near the city of Rufus, Oregon, 215 miles upstream of the Pacific Ocean.
Is the John Day River open for steelhead fishing?
John Day River
Open all year for hatchery steelhead. No limit on size or number of bass. Use of bait allowed.
Where can I swim in John Day?
Swimming
- North Fork John Day Ranger District. The North Fork John Day District is 465,000 acres in the heart of the Blue Mountains.
- Driftwood Campground.
- North Fork John Day River.
- Olive Lake Campground.
- Oriental Campground.
- Pomeroy Ranger District.
- Walla Walla Ranger District.
- Jubilee Lake Picnic Site/ Day Use Area.
What river runs through Monument Oregon?
North Fork John Day River
The North Fork John Day River is a 107-mile (172 km) tributary of the John Day River in the U.S. state of Oregon.
| North Fork John Day River | |
|---|---|
| Basin size | 1,800 sq mi (4,700 km2) |
| Discharge | |
| • location | Monument, Oregon, 15.3 miles (24.6 km) from mouth |
| • average | 1,297 cu ft/s (36.7 m3/s) |
How did the John Day River get its name?
John Day Point, a cape located at the mouth of the river and protruding into Cathlamet Bay, takes its name from the river, as did a former railway station in the vicinity. Lewis and Clark, who camped near here in 1805, referred to the river as Kekemarke, their version of a Native American name.
Who was John Day in Oregon history?
John Day was an American hunter who came to Oregon in 1812 as a straggler from the Pacific Fur Company’s overland expedition to Astoria.
What state is the John Day Dam in?
Oregon
John Day Dam is 216 miles upstream from the mouth of the Columbia River and located at Exit 109 off Interstate 84 in Oregon. The project consists of a navigation lock, spillway, smolt monitoring facility, powerhouse and fish-passage facilities on both shores.
How fast does the John Day River flow?
The average flow at the gauge is 2,075 cubic feet per second (58.8 m3/s).
How many dams are on the Columbia River?
There are 14 dams on the mainstem Columbia from Mica to Bonneville, and five on the lower Snake from Hells Canyon Dam to Ice Harbor Dam. As of July 2017, Columbia River Basin hydropower dams have a total nameplate capacity of 34,318 megawatts and produce, on average, 16,254 megawatts of electricity.