Residential 5,000 (R5)
What is R5 zoning in Washington County Oregon?
Intent and Purpose
The R-5 District is intended to implement the policies of the Comprehensive Plan for areas designated for residential development at no more than five (5) units per acre and no less than four (4) units per acre, except as specified otherwise by Section 300-2, Section 300-5, or Section 302-6.
What is RS zoning in Oregon?
The purpose of the RS (single-family residential) zone is to allow development of attached or detached residences on individual lots provided with urban services at low urban densities. Other uses provided in MCC 16.02. 010 and 16.02.
What is r6 zoning Oregon?
The infill standards apply to residential development of properties in the R-5 and R-6 land use districts that are 2 acres or less in size, and their primary purpose is to promote the privacy of existing developed areas when residential infill development occurs.
What is r7 zoning in Oregon?
The purpose of the low-density residential (R-7) zone is to implement the low-density residential land use designation and policies of the comprehensive plan. The R-7 is intended to establish low-density residential home sites with a minimum gross acreage of 7,000 square feet.
What is r10 zoning in Oregon?
To do this, the R-10 very low-density residential zone regulates the construction of detached single-unit dwellings and middle housing on existing lots, and provides design guidance for low-density residential subdivisions. [Ord.
What is r5 zoning in NC?
R-5, Residential Single-family 5 District Page 3 City of Greensboro, North Carolina Land Development Ordinance – V20170818 Page 163 The R-5, Residential Single-family district is primarily intended to accommodate low-density single-family detached residential development.
Can you build on recreational land in Oregon?
Recreational zoning typically means you can’t build a permanent structure on the land. Each area, however, will have different meanings for the term. Overall it often means you can’t live there permanently.
What is R2 zoning?
The R2 Zone variation provides for and regulates low density residential development in the form of single detached dwellings, semi-detached dwellings, duplex dwellings and two unit converted dwellings. The Residential R2 Zone variations are symbolized by R2 followed by a dash and a number.
How close to the street can you build a house?
The minimum distance from the front property line should be 35 feet. Even so, this can vary if it’s specified greater on the zoning map. Older neighborhoods may be subject to some exceptions. The minimum distance from the back and side property lines should be 10 feet and 3 feet from any easement.
What is R1 zoning in Oregon?
In an R1 zone, buildings shall not occupy more than 40 percent of the lot area except where an accessory dwelling unit is constructed, and then buildings shall not occupy more than 50 percent of the lot area. [Ord.
What is r2 zoning in Oregon?
multifamily residential
The purpose of the R-2 (multifamily residential) zoning district is to provide for medium- to high-density housing in multiple-family structures and their directly related complementary and accessory uses.
What is RC zoning in Oregon?
The optional Residential-Commercial (RC) zone, for example, is specifically designed to promote mixed-use, while serving as a transition between residential neighborhoods and more intensive commercial or employment areas.
Do you need a permit to build a fence in Oregon?
You can also schedule an appointment to discuss your project. You don’t need a building permit when putting up a fence seven feet or less in height. You do need a building permit when building a fence taller than seven feet in height.
What is WR zoning in Oregon?
Single Family Residential Zones
Woodland Residential District- The purpose of the W-R district is to stabilize and protect the steep and forested areas within the City.
What does land use zoning mean?
Land use zoning is a method used by the government to classify parcels of land and restrict the physical development or use of certain parcels of land. Learn about the definition, codes, and types of land zoning, including residential, historical, commercial and industrial. Updated: 10/17/2021.
What is r6 zoning King County?
Base Codes:
| A-10 | Agricultural, one DU per 10 acres |
|---|---|
| R-4 | Residential, four DU per acre |
| R-6 | Residential, six DU per acre |
| R-8 | Residential, eight DU per acre |
| R-12 | Residential, 12 DU per acre |
What is CM3 zoning Portland?
The Commercial/Mixed Use 3 (CM3) zone is a large-scale zone intended for sites in high-capacity transit station areas, in town centers, along streetcar alignments, along civic corridors, and in locations close to the Central City.
What is r6 zoning in NC?
R-6: Single-Family Residential-6. The R-6 district is established to provide for orderly suburban residential development and redevelopment. Intended to protect, preserve and enhance existing residential areas of higher density which include multi-family dwellings mixed with other housing types.
What is low density commercial zone?
The C-1 low density commercial district is intended to apply to an area adjacent to major arterial streets and convenient to major residential areas. The types of uses permitted are intended to serve the consumer needs of nearby residential neighborhoods as well as the commercial needs of the motorist.
How can private land use change over time?
Explain how private land use can change over time. Old houses being converted into businesses, farmland being developed for residential and non-agricultural commercial purposes or factories and industrial sites being closed and redeveloped.