People who drill water wells for their personal use (and not for larger-scale uses such as irrigation) do not need to apply for a water right, and thus generally do not need to interact with the DWR. The Kansas Department of Health and Environment has general responsibility for water-quality issues in the state.
Can I drill a well myself?
Drilling a shallow well is a pretty simple task, going down about 25 feet or so when you hit first water (at least in my location). This type of well could be drilled in a weekend by hand using a general purpose, extendable post-hole auger. This type of well can be cased off with a manual pump and used for irrigation.
How much does it cost to drill a well in Kansas?
Well Drilling Costs By State
| State | Average Cost Per Foot |
|---|---|
| Kansas | $28 – $61 |
| Kentucky | $27 – $59 |
| Louisiana | $28 – $61 |
| Maine | $27 – $58 |
How deep are water wells in Kansas?
In southeastern Kansas, the depth to the top of the aquifer ranges from 200 feet (60 m) in southeast Cherokee County to more than 1,000 feet (300 m) in northwest Crawford County. Well yields typically range from 150 gpm to more than 1,000 gpm.
How deep can I drill my own well?
For drinking water wells it’s best to be at least 100 feet deep so that surface contaminants cannot enter the well. The average well depth for private homes is between 100 to 800 feet [2]. You may need a deeper or shallower well if your area has different geology than another region of the country.
How do I find the water table in my area?
Contact your county or state health department, check with your State Certification Officer, or use this EPA website for a list of state certified laboratories in your area that do water testing. The cost will vary, depending on the laboratory and the test(s), but people usually consider the cost to be reasonable.
How do I know if I can drill a well on my property?
If you own a remote property that needs a well, here are some tips on how to find the best location to dig a well.
- Consider Other Nearby Properties.
- Keep the Well Away from Septic Drainage Fields.
- Keep the Well Away from Animal Pens.
- Look for an Absence of Large Rocks.
How do you know if there is water in your land?
Public water is commonly provided by a governmental entity or water company. To find out whether public water is available, look at the details of the sales listing for the land or talk to the seller or a real estate agent (if one is involved).
How long does it take to drill a 500 foot well?
*Prices are for a complete water well system. to drill. A well takes about a week to install and lasts up to 40 years with proper maintenance and care.
Is there a aquifer in Kansas?
The High Plains aquifer components in Kansas are made up of the Ogallala, Great Bend Prairie, and Equus Beds regions as shown on the map below. The High Plains aquifer underlies about 174,000 square miles of the central United States. It falls east of the Rocky Mountains in the southern part of the Great Plains.
What is ground water level?
Groundwater level is a term that is used in a relatively loose way, normally referring to the level, either below ground or above ordnance datum, at which soil or rock is saturated. This is also referred to as the water table and represents the top of the saturated zone. Above the water table lies the unsaturated zone.
Which is the largest water well?
The Woodingdean Water Well is the deepest hand-dug well in the world, at 390 metres (1,280 ft) deep. It was dug to provide water for a workhouse. Work on the well started in 1858, and was finished four years later, on 16 March 1862.
Do deeper wells mean better water?
Water quality in a deep well usually changes more slowly than in a shallow well. That’s because groundwater does some mixing as it moves through the aquifer. A spill a mile away from your deep well in the Basin and Range aquifer might be substantially diluted with clean aquifer water before it gets to your well.
Does rain replenish well water?
While your well is a 6” hole in the ground, it is not directly replenished by rainfall, as you might expect a cistern to function. The rainfall that seeps into the ground on your property moves through the soil at a rate of only 10 feet per year.
Can you drink water from a shallow well?
Your well water may NOT be safe to drink. water if the well casing is damaged or if you have a dug or shallow well. get into Maine wells from nature. They’re in the rocks and can dissolve in water.
Is there an app to find underground water?
IGRAC has recently launched an updated version of GGMN – Groundwater Monitoring app. This app enables users to georeference and register groundwater monitoring stations and groundwater level monitoring data in the Global Groundwater Monitoring Network (GGMN) Portal.
How do I know how deep my water well is?
How to Measure
- Lower until you feel slack. Note, you may feel some bouncing as you pass the pump depending on the space from the casing to the weight on the measuring line.
- Mark the line at the top edge of the casing.
- Pull out and measure. This is your well depth – the distance to the bottom of the well shaft.
How do I know how deep my well is?
If you cannot see the top of water in your well then you can tie a fishing float or “bobber” to your string and lower it carefully into the well until it stops dropping. Mark the string at ground level. Measure that string length – that’s the depth from the ground surface to the top of your well water.
How do well drillers find water?
If there are no wells in the area, or not enough information is available on existing ones, the hydrologist may contract with a well driller to put down some test holes. At these holes a pumping or aquifer test will be conducted. These tests indicate the water-bearing properties of the aquifer tapped by the well.
What kind of pipe is used for a well?
Poly pipe is fast becoming the most common and efficient way to install a submersible well pump. With most well depths up to 350′ the 160psi HDPE Black Poly Pipe shown below in green is the top choice for well pumps and solar well pumps.
Which trees indicate underground water?
Trees like the ash, the alder, the willow and the poplar are also useful in this regard. These trees generally grow in freshwater aquifers where the water table depth is not more than ten meters. These species are found in riparian ecosystems and areas characterized by shallow groundwater, such as bottomlands.